ConstructionGo – Construction Tips, Cost Guides

Search This Blog

Survey Engg Quiz

Get link
Facebook
X
Pinterest
Email
Other Apps

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

Importances of Sunshade, tie beams and R.c.c Mullion

SUNSHADE It's a big mistake if we do not construct sunshades. The sunshade is very useful for protecting against sun and rainfall. With all buildings, a structure sunshade is also designed considering the location of the window and the rainfall type in that area. The amount of cantilever needed for sunshades depends on the sun and rain, but it should not be less than 0.5 x the height of the window. For Example height of the window is 1.2 M, so the cantilever should be not less than 0.6M. Apart from the sunshade cantilever, drip mold is also very important. to break the flow of water through the surface has to be blocked with drip mold. small offset as shown in the photo, break the flow. Click here Ad ve rt is em en ts on this site Now the Same has to follow for the door area also. Sunshade reinforcement is from the beam hence beam has to be designed considering the same. Many times you have seen that most of the time people miss the sunshade and later they go with M.S...

Mud & Stone House Design for Farmhouses

Types of Mud & Stone House Design for Farmhouses A professional, builder-friendly guide to earthen and stone architecture—covering styles, materials, details, climate strategies, budgets, and real-world sketches you can actually use. Sketch: a simple mud-and-stone farmhouse with verandah Contents Why mud & stone are perfect for farmhouses Mud systems: cob, adobe, rammed earth, CSEB & more Stone options by region & character Hybrid designs: mud + stone done right Design styles that work on farms Climate strategy: hot-dry, warm-humid, cold Critical details: ...

Water proofing and Holler making

Best waterproofing material and tricks *** *** Before we proceed, I would like to clarify that waterproofing depends on both the material and the way you apply it. I will divide this topic into two-part. In the first part, we will cover how to make the structure itself waterproof and in the second part, we will cover the coating layer or superficial work. Part 1:- To make the structure itself waterproof we have to make the concrete structure dense, so we have to take care while making the concrete mix. The water-cement ratio should be proper. The admixture should be in proper quantity, I suggest SP 5000 of Facroc ( 4 kg / per m3), this Precaution to be taken before while making concrete, similarly at the time on creating proper vibrator should be used, it is always good to use the proper amount of vibration not to less and not too more. If we are casting top roof slab then proper slope should be maintained, if water...

Powered by Blogger

Survey Engg Quiz

Comments

Post a Comment