ConstructionGo – Construction Tips, Cost Guides

Search This Blog

Civil Engineers Tools

on December 02, 2023

Get link
Facebook
X
Pinterest
Email
Other Apps

Civil Engineers Tools

Get link
Facebook
X
Pinterest
Email
Other Apps

Comments

Importances of Sunshade, tie beams and R.c.c Mullion

SUNSHADE It's a big mistake if we do not construct sunshades. The sunshade is very useful for protecting against sun and rainfall. With all buildings, a structure sunshade is also designed considering the location of the window and the rainfall type in that area. The amount of cantilever needed for sunshades depends on the sun and rain, but it should not be less than 0.5 x the height of the window. For Example height of the window is 1.2 M, so the cantilever should be not less than 0.6M. Apart from the sunshade cantilever, drip mold is also very important. to break the flow of water through the surface has to be blocked with drip mold. small offset as shown in the photo, break the flow. Click here Ad ve rt is em en ts on this site Now the Same has to follow for the door area also. Sunshade reinforcement is from the beam hence beam has to be designed considering the same. Many times you have seen that most of the time people miss the sunshade and later they go with M.S...

Water proofing and Holler making

Best waterproofing material and tricks *** *** Before we proceed, I would like to clarify that waterproofing depends on both the material and the way you apply it. I will divide this topic into two-part. In the first part, we will cover how to make the structure itself waterproof and in the second part, we will cover the coating layer or superficial work. Part 1:- To make the structure itself waterproof we have to make the concrete structure dense, so we have to take care while making the concrete mix. The water-cement ratio should be proper. The admixture should be in proper quantity, I suggest SP 5000 of Facroc ( 4 kg / per m3), this Precaution to be taken before while making concrete, similarly at the time on creating proper vibrator should be used, it is always good to use the proper amount of vibration not to less and not too more. If we are casting top roof slab then proper slope should be maintained, if water...

Compound Wall Construction & Fencing: Cost, Height & Wall Design (Full Guide)

Er. Rehan Qamar Compound Wall Construction & Fencing: Cost, Height & Wall Design (Full Guide) Everything you need to choose, design, and price your boundary—brick, stone, precast RCC panels, chain-link, MS grill, GI sheet, barbed/razor wire, and more. Includes a practical cost vs. height vs. type table. Jump to Sections → See Cost Table What’s inside Why a compound wall or fence? Types of walls & fencing Wall design basics (height, footing, loads) Cost table: height × type × range Quick quantity & budgeting formulas Specification checklist Build tips, QA & maintenance FAQ Why compound wall construction or fencing? Security: first barrier against trespass; enables controlled gates and CCTV lines. Privacy & noise control: solid walls block views and attenuate traffic noise. Safety: keeps children, pets, ...

Powered by Blogger

Civil Engineers Tools

Comments

Post a Comment